Dark Navyblue Powder Fabric Dye

Q: Are Viktoria Powder Fabric Dyes harmful to health?

A: Viktoria Powder Fabric Dyes do not contain any harmful and allergenic substances. You can request the MSDS (Security Certificate) documents of the products by contacting Viktoria Dye Company. The dyed water that goes to the sewer after dyeing process is not harmful to the environment. The products are certified and produced in accordance with the Reach Legislation.

Q: Can fabric contaminated with bleach be dyed?

A: Bleach stains cannot be dyed due to the damage caused by the bleach on the texture of the fabric fibers. As an exception, small areas with minor damage can be dyed over.

Q: How much Viktoria Powder Fabric Dye do I need to dye fabric?

A: You can dye 200 grams of dry fabric with one package (10 gr) of Viktoria Powder Fabric Dye. You can calculate the exact dye amount you will need by weighing your fabric. Ex: a t-shirt weighs 200 gram and a pair of jeans weights 400 gram.

Q: What type of fabrics can be dyed with Viktoria Powder Fabric Dye?

A: All fabrics that do not contain polyester fiber can be dyed. Polyester is a fabric type that cannot be recognized by eyes or hands, so it is necessary to check the product label to find out. Fabrics containing up to 15% polyester can be dyed, but the polyester-containing part of the fabric will remain undyed. For example, if you dye a pair of jeans and notice that the sewing threads are not dyed, this is because the threads are made of polyester.

Q: How can I dye fabric with Viktoria Powder Fabric Dye?

A: You can choose one of three methods for the dyeing process. You can dye your fabrics in your washing machine, in a bucket or in a pot. Temperature of the water is important for dyeing quality. However, each fabric can withstand different degrees. For this reason, we recommend you to choose the best suitable method for your fabric. The higher the temperature, the shorter the dyeing time and the lower the temperature, the longer the dyeing time. For example, while the dyeing process is done in 30 minutes by boiling in a pot, this time will increase to 1 hour or 1 hour 30 minutes with a bucket full of hot water or at 30 C in the washing machine.

Q: What is Fiske Fabric Dye Stabilizer? Do I have to use it?

A: Fiske is a protective product that you can use on fabrics that you have dyed or recently purchased cloths. It has two package options: 30cc and 1 liter. It protects your fabric against fading caused by sunlight and washing. It is recommended to use 30 cc Fiske with one package of Viktoria Powder Fabric Dye. We recommend it after every dyeing for long-term color protection.

Q: What should I pay attention to when dyeing fabric?

A: The first thing to consider is the type of fabric. If it is not polyester, you can choose a method suitable for your fabric. You can check your cloth’s label to choose the right temperature. If you want to dye in your washing machine, you need to dissolve the dye in a glass of warm water and put it in the tub of your machine. If you put it into the detergent drawer, the dye may come back in the next washing programs. You will not have such a problem if you put it in the tub. One thing to be careful about with dyeing in the washing machine is to skip squeezing process. If it is to be done, it should be at very low RPM.

Q: How to dye fabric in the washing machine?

A: Several pieces of fabric can be dyed at the same time. Dissolve the dye in water and put it into the tub with your fabric. Then select the highest washing temperature suitable for the fabric. If you would like to use Fiske Fabric Dye Stabilizer, add it to the softener drawer and start the program. When the washing process is finished, you can dry the fabric and it is ready to use.

Q: How can I dye fabric in a bucket?

A: Choose a bucket in which your fabric can move freely. Add water at the right temperature for the fabric to the bucket. Add the dye you have determined according to the weight of your fabric to the water and mix until it dissolves. Then add your fabric and mix it occasionally until the entire surface of your fabric is dyed. Soak in water until the water cools down completely. Then rinse your fabric until the rinse water runs clearly. If you will use Fiske Fabric Dye Stabilizer, put it to clean warm water to the amount that your fabric can float in and leave the fabric in the water for 30 minutes. Then you can rinse your fabric and let it dry. 

Q: How can I dye fabric in a pot?

A: Choose a pot in which your fabric can move freely. Add water to the pot and turn on the stove. Add the dye you have determined according to the weight of your fabric to the water and mix until it dissolves. When it reaches the suitable temperature for your fabric, add the fabric. Stir it occasionally until the entire surface of the fabric is dyed. Dyeing duration will depend on the temperature of the water. For example, at the boiling point 30 minutes will be enough. You can extend the duration for lower temperatures. Then turn off the stove and leave the fabric in the water until it cools down. Then rinse your fabric until water runs clear. If you will use Fiske Fabric Dye Stabilizer, put it to clean warm water to the amount that your fabric can float in and leave the fabric in the water for 30 minutes. Then you can rinse your fabric and let it dry.

Q: How can I change the color of my fabric?

A: Color changing can be made from light to dark colors in fabric dyeing processes. For example, you can dye yellow fabric to black. All fabrics can be dyed black. The background color affects the dyeing result. For example, when you want to dye your yellow fabric to blue which is a darker color, the result will be a mixture of two colors, not exactly blue, but close to green due to the effect of the yellow background.

Q: Do I need to use salt, vinegar and detergent?

A: Salt helps the dye molecules move into fabric fibers during the dyeing process. It is supportive when used, and it’s also okey if it is not used. You can still have a good result without using salt. Vinegar can be used to maintain the acid balance in the dyeing pool while dyeing fabric types including wool. Detergent softens the fabric fibers during dyeing. It helps the pores to expand and distributes the dye evenly on all surfaces. Salt, vinegar and detergent are supporting products and can improve the quality of dyeing when used correctly. As a scale, 2 tablespoons of salt, a tea glass of vinegar and 1 teaspoon of detergent can be used for 10 g of fabric dye.