Viktoria Powder Fabric Dyes harmful to health?
Viktoria Powder Fabric Dyes do not contain any harmful and allergenic
substances. You can request the MSDS (Security Certificate) documents of
the products by contacting Viktoria Dye Company. The dyed water that goes to
the sewer after dyeing process is not harmful to the environment. The
products are certified and produced in accordance with the Reach Legislation.
fabric contaminated with bleach be dyed?
Bleach stains cannot be dyed due to the damage caused by the bleach
on the texture of the fabric fibers. As an exception, small areas with minor
damage can be dyed over.
Q: How much
Viktoria Powder Fabric Dye do I need to dye fabric?
A: You can dye 200
grams of dry fabric with one package (10 gr) of Viktoria Powder Fabric Dye.
You can calculate the exact dye amount you will need by weighing your fabric.
Ex: a t-shirt weighs 200 gram and a pair of jeans weights 400 gram.
Q: What type
of fabrics can be dyed with Viktoria Powder Fabric Dye?
fabrics that do not contain polyester fiber can be dyed. Polyester is
a fabric type that cannot be recognized by eyes or hands, so it is necessary to
check the product label to find out. Fabrics containing up to 15% polyester can
be dyed, but the polyester-containing part of the fabric will remain undyed.
For example, if you dye a pair of jeans and notice that the sewing threads are
not dyed, this is because the threads are made of polyester.
Q: How can I
dye fabric with Viktoria Powder Fabric Dye?
can choose one of three methods for the dyeing process. You can dye your
fabrics in your washing machine, in a bucket or in a pot. Temperature of the
water is important for dyeing quality. However, each fabric can withstand
different degrees. For this reason, we recommend you to choose the best
suitable method for your fabric. The higher the temperature, the shorter the dyeing
time and the lower the temperature, the longer the dyeing time. For example,
while the dyeing process is done in 30 minutes by boiling in a pot, this time
will increase to 1 hour or 1 hour 30 minutes with a bucket full of hot water or
at 30 C in the washing machine.
Q: What is
Fiske Fabric Dye Stabilizer? Do I have to use it?
is a protective product that you can use on fabrics that you have dyed
or recently purchased cloths. It has two package options: 30cc and 1
liter. It protects your fabric against fading caused by sunlight and washing. It
is recommended to use 30 cc Fiske with one package of Viktoria Powder Fabric
Dye. We recommend it after every dyeing for long-term color protection.
should I pay attention to when dyeing fabric?
first thing to consider is the type of fabric. If it is not polyester,
you can choose a method suitable for your fabric. You can check your cloth’s
label to choose the right temperature. If you want to dye in your washing
machine, you need to dissolve the dye in a glass of warm water and put it in
the tub of your machine. If you put it into the detergent drawer, the dye may
come back in the next washing programs. You will not have such a problem if you
put it in the tub. One thing to be careful about with dyeing in the washing machine
is to skip squeezing process. If it is to be done, it should be at very
Q: How to
dye fabric in the washing machine?
Several pieces of fabric can be dyed at the same time. Dissolve the dye in
water and put it into the tub with your fabric. Then select the highest washing
temperature suitable for the fabric. If you would like to use Fiske Fabric Dye
Stabilizer, add it to the softener drawer and start the program. When the washing
process is finished, you can dry the fabric and it is ready to use.
Q: How can I
dye fabric in a bucket?
a bucket in which your fabric can move freely. Add water at the right
temperature for the fabric to the bucket. Add the dye you have determined
according to the weight of your fabric to the water and mix until it dissolves.
Then add your fabric and mix it occasionally until the entire surface of
your fabric is dyed. Soak in water until the water cools down completely.
Then rinse your fabric until the rinse water runs clearly. If you will use
Fiske Fabric Dye Stabilizer, put it to clean warm water to the amount that your
fabric can float in and leave the fabric in the water for 30 minutes. Then you
can rinse your fabric and let it dry.
Q: How can I
dye fabric in a pot?
a pot in which your fabric can move freely. Add water to the pot and turn on
the stove. Add the dye you have determined according to the weight of your
fabric to the water and mix until it dissolves. When it reaches the suitable
temperature for your fabric, add the fabric. Stir it occasionally until the
entire surface of the fabric is dyed. Dyeing duration will depend on the
temperature of the water. For example, at the boiling point 30 minutes will be
enough. You can extend the duration for lower temperatures. Then turn off the
stove and leave the fabric in the water until it cools down. Then rinse your
fabric until water runs clear. If you will use Fiske Fabric Dye Stabilizer, put
it to clean warm water to the amount that your fabric can float in and leave
the fabric in the water for 30 minutes. Then you can rinse your fabric and let
Q: How can I
change the color of my fabric?
changing can be made from light to dark colors in fabric dyeing
processes. For example, you can dye yellow fabric to black. All fabrics can be
dyed black. The background color affects the dyeing result. For example, when
you want to dye your yellow fabric to blue which is a darker color, the result
will be a mixture of two colors, not exactly blue, but close to green due to
the effect of the yellow background.
Q: Do I need
to use salt, vinegar and detergent?
A: Salt helps
the dye molecules move into fabric fibers during the dyeing process. It is
supportive when used, and it’s also okey if it is not used. You can still have
a good result without using salt. Vinegar can be used to maintain the acid
balance in the dyeing pool while dyeing fabric types including wool.
Detergent softens the fabric fibers during dyeing. It helps the pores to
expand and distributes the dye evenly on all surfaces. Salt, vinegar and
detergent are supporting products and can improve the quality of dyeing
when used correctly. As a scale, 2 tablespoons of salt, a tea glass of vinegar
and 1 teaspoon of detergent can be used for 10 g of fabric dye.
You can scan the QR code on the back of the package
with your camera to access more detailed information and application videos.